PE 4300 is a carbon filled co-polymer acrylic water based adhesive for the installation of conductive, static dissipative, and some antistatic vinyl floorcoverings.
Good resistance to plasticizer and cures to form a strong bond
|Appearance||: Black Paste|
|Solids||: 62.0 +/- 2.0%|
|Base polymer||: Acrylic|
|Flammability||: Non flammable|
|Viscosity||: 50,000 – 70,000 cps.|
|S.G.||: 1.20 ± 0.02|
|Conductivity Resistance||: < 3 x 105 ohms|
For Bonding of
- Commercial grade, conductive, static dissipative and some antistatic vinyl floorcoverings, vinyl floor and wall coverings.
- Sound, absorbent, smooth and dry subfloors of concrete; conventional sand / cement screeds or underlayment; plywood; hardboard or cement sheet underlays.
- Other surfaces, such as asphalt, granolithic, terrazzo, quarry tiles and concrete surfaces treated with waterproof membranes or some curing agents should be skimmed with minimum of 3 mm of a proprietary cementitious underlayment according to manufacturers’’ recommendations.
Approximately 3 – 5 square meters per liter depending upon the condition and absorbency of the substrate and the type of applicator used.
Any Polymer 4300 on the surface of the vinyl should be removed with a well dampened cloth. Do not allow to dry.
12 months in unopened containers stored under appropriate conditions.
Recommended to be stored at temperatures between 5 and 30 degree Celsius. Keep in well ventilated areas away from sources of heat.
18.4 kg plastic containers
All product images shown are for illustration purposes only. Actual products may varies in term of size, colour, shades and other relevant characteristics.
Inquiry - PE 4300 Conductive Sheet Vinyl Adhesive
Fill out the form below and we'll be in touch soon.